Ten Wall Fire Place Electric Myths You Shouldn't Post On Twitter

A Wall Fire Place Electric Adds Warmth and Style to Any Room

A wall-mounted electric fireplace can be an excellent focal point in any room. It's warm and inviting. It can be mounted on the wall flush or partially recessed. If recessed, follow the manufacturer's guidelines on framing and installing the fireplace inside the wall.

Installation is similar to hanging a television or shelving. Most models require an electrician to connect the electrical system.

Easy to Install

A wall-mounted electric fireplace is a great way to add warmth and elegance to any room. It's easy to set up and does not require gas lines or exterior venting. It is also available in different sizes and styles to fit any space within the home. However, it is important to consider the location of your home before choosing a particular model.

If you are planning to put a fireplace over your TV, ensure that the screen is big enough to allow for it. Also, consider whether furniture blocks the view of the fireplace. A wall-mounted fireplace will free up the floor space and will give your home a more open and spacious feel.

Installing a recessed electric fireplace can be easy if you follow the instructions included with it. First, you'll need to frame the opening of the fireplace with 2x6s which are one inch smaller than the finished wall. Also, you should mark the center of the rough opening and place studs every 16 inches across both plates. Use a level once you have framed your opening to ensure it is plumb. Then put the bracket to the opening. If your fireplace has side brackets, remove them to reveal the screws to fasten.

After you have hung the fire appliance, connect it to the mounted bracket with large washer head screws and wall anchors. Make sure that all screws are firmly driven into the solid backing. You may have to connect an outlet to the wall. This can be accomplished by a qualified electrician according to local codes.

If you don't have the skills to carpentry, you can hire a professional to build out the fireplace's wall or put up frames in an existing wall for you. They can also put up drywall and tape, as well as mud the walls prior to putting your fireplace in. They can also paint an existing wall to give it a more finished appearance. After you've completed these steps the fireplace is now ready to use.

Easy to Operate

A wall mounted electric fireplace is simple to operate. A majority of models have a simple remote to control the effects of flames and heating functions. Some come with a powerful smartphone application that lets you control the fireplace from anywhere in the room. Certain models can be controlled using voice commands via Amazon Alexa or Google Assistant. These features make wall-mounted electric fires a great addition for any home.

Check the installation instructions for your model before you begin. Certain models may require an expert installer, however others are relatively easy to install by yourself. It's important that you understand the weight of these units and ensure that your wall is able to be able to support them prior to starting. You should also be aware of the direction the heat is blowing and if there are any combustibles nearby.

Some wall-mounted fires can be wired hardwired, whereas others require a plug. If you're not sure whether you're able to do this yourself, think about hiring a professional electrician to handle the job for you. Depending on  Electric Wall mounted fireplaces clearance www.fireplacesandstove.com , you may require basic framing or bump-out to accommodate the electrical cord and plug.

The place of your fireplace may affect its appearance and performance. Some people prefer having their fireplaces on the level of their eyes when they sit on the sofa. If that's you then it's essential that your TV be placed over your fireplace.

You can use a spirit-level to mark the place of the brackets on the wall. This will allow you to determine if the wall is able to support the fire. Make sure the wall is equipped with studs or drywall, and ensure that the cord of the fireplace is able to connect to a three-spot electric outlet.

Easy to Clean

Modern corner electric fireplaces can be cleaned more easily than natural gas or wood-burning fireplaces. The reason for this is that they don't use anything, which means they don't cause ash or creosote build-up. They still need to be cleaned regularly to keep them looking good and performing at their best. Fortunately, the process of cleaning is very simple and doesn't require any harsh chemicals. You can make use of a cloth slightly dampened by water to wipe the outside of the fireplace and a dry one to get rid of dust from the inside of the fireplace.

Before cleaning the fireplace, make sure that it's fully cooled. Unplug the appliance or, if it's wired, turn off the circuit breakers that power it. It's important to avoid using any liquid cleaner on the grate since it could create an electrical risk. Instead, you should use a lint-free, non-smudge cloth that has been slightly dampened with lukewarm water. Avoid using any cleaning products that contain abrasive materials, as they can scratch the surface of your fireplace.

Then clean the grate with a damp cloth. You may also want to clean the sides of the glass and any other areas of the fireplace that aren't covered by the grate. You can also make use of the soft brush attachment on a vacuum to remove dust and dirt from the fireplace's interior.

Once you've completed this, it's time to begin cleaning the blower and light bulbs. Remember not to use water on the light bulbs or the blower as this could cause an electrical danger. Instead, it's a good idea to employ a dry microfibre fabric to clean dust from these areas. To avoid injury, turn off the fireplace first. Be aware that some electric fireplaces lack ventilation. This is why you must be cautious when cleaning them. Check the owner's manual if you need assistance.

Easy to Maintain

In-wall electric fire places require minimal maintenance so long as they are installed and operated correctly. It is recommended to be able to have your fireplace inspected every year by an electrician to ensure it is working efficiently and safely. You can keep the glass surface free of dust and dirt by wiping it.

First, you must switch off and unplug your electric fireplace before cleaning it. This will prevent any electric shocks and other dangers. You can remove the access panel or the glass front of the fireplace once it is shut off. Wipe the surface with a dry cloth made of microfibre to remove any fingerprints. If the glass is stained with persistent spots or stains, you can dampen the cloth with a mixture cleaner and water. If your fireplace is equipped with an air blower, you can make use of a dry microfibre cloth rather than a damp one to prevent the infiltration of water into electrical components.

In general, you should not use any cleaning products with abrasive properties or paper towels as they can scratch or damage your glass. In most cases, you can clean the glass surface with a lint-free cloth. However, if you notice that the glass is getting dull or dirty it is possible to make use of a glass cleaner or distilled vinegar to remove buildup. Spray the cleaner directly onto the cloth to prevent streaking.

If the glass is clean you can replace it and connect it to your fireplace. If your fireplace has a mirrored surface, you may need to rub the mirror gently with a soft towel to get rid of any streaks. You can also purchase a glass cleaner spray that comes in various strengths.

You should also clean the air vents and inlets located at the base of your fireplace. These can become very dusty, and can hinder the flame effect of your fireplace. To get the best results, you should apply a soft dry microfibre cloth to clean these areas. If you need to clean a difficult-to-reach area, you can try using compressed air to blow out any dust that has settled in these tight spaces.